BabySense V Baby Movement Monitor

Not Rated, Be the First! | Login to Rate

Use your FSA or HSA Benecard!

E-mail this product to a friend

Seen this for less? Tell us where!

Description

BabySense Monitor

As seen in our SkyMall ad!

Rest Peacefully Knowing Your Baby Is Breathing!

Buy the BabySense Respiratory Movement Monitor from ActiveForever to assist you with the constant detection of your baby's movement while your baby sleeps. BabySense is a highly sensitive and non-touch device that monitors your baby's breathing and movements through the mattress while your baby is sleeping.

Getting sleep when you have an infant is a challenge, sometimes even more when they are sleeping. The BabySense Movement Monitor helps with the nerve-wracking duty of putting your baby to sleep. Infants move constantly while sleeping and even in the brightest light these movements can be difficult to see. The BabySense Monitor rests under the mattress and alerts you when stopping or slowing of your baby's movement occurs while your baby sleeps.

With two sensors located underneath the crib mattress, the Babysense Movement Monitor maintains detection of movements and micro-movements. If there are no movements for a period of 20 seconds OR if less then 10 movements per minute, the Babysense Movement Monitor will emit a loud alarm that can be easily heard from a distance.

This alarm does not shut off if baby stirs. It requires an adult caregiver to reset it.

Babysense Movement Monitor uses 4 AA batteries and does not emit a wireless signal. This means it is less likely to receive interferences from cell phones and other wireless devices. The Babysense Monitor is a measure of protection, which, when combined with “Safe Sleeping” precautions (sleeping on the back, not overheating baby's room, not smoking around the baby) provides safety and peace of mind.

BabySense Monitor Features:

One button activation
Operates on regular AA batteries (batteries last approximately 6 months)
Not wireless - no interferences from telephones, mobile phones or remote garage door openers
Compact, portable & easy to use
Alarm requires manual shut-off
The Original Patented Infant Movement Monitor
Used in Homes, Day Care Centers and Hospitals worldwide
CE certified and part 15 of the FCC approved
Certified as a medical product in Europe, Israel, Japan and Australia
First non-touch monitor for detection of respiratory cessation (apnea)
This monitor must be shut off each time you take your child out of the crib

BabySense Monitor Safety Features:

Constant monitoring of your baby's slightest movement.
Auditory and Visual (red light) alarm is activated if baby's motions stop for more than 20 seconds or if the monitor detects less than 10 micro-movements per minute.
A safe and integrated system: Monitoring unit is connected to sensor pads placed between mattress and crib or bed base. The highly sensitive sensors are not in direct contact with the baby. Infant movement is in no way limited or obstructed.
The passive sensors are totally safe and emit no radiation of any kind which could harm the baby. Babysense V is neither seen nor felt by the baby, yet it senses every movement the baby makes.

Advisories & Warnings About Babysense V Movement Monitor's Usage:

The Babysense Monitor is not a medical device. It monitors and alerts, but cannot prevent any type of distress. The responsibility of assistance rests on you. Babysense Monitor senses movements and motion only and cannot monitor other occurrences. The purpose of the device is to alert you when stopping or slowing of movement occurs.

Trouble Shooting Chart

Symptom	Possible Cause	Solution
Alarms	1. Two sensors connected while the baby is less than 3 months old and does not crawl yet. 2. Only one sensor is connected, the baby has crawled off the sensor-to the far side. 3. Bottom of the bed (under the mattress) is soft of spring. 4. Rigid mattress such as ploystyrene. 5. Incorrect sensor placement.	1. Connect only one sensor. 2. Connect two sensors. 3. Place a rigid bottom such as plywood board under mattress and under sensor plate. 4. Change mattress. 5. Install sensors as instructed in Parents Guide.
Too long delay until alarm OR Green light flashes repeatedly while conducting Performance Test (see Parents Manual)	1. 20 seconds seem quite a long time while waiting. 2. Environmental influences detected by the monitor such as wind, fan, air conditioner, play mobile, household vibrations. 3. Motion, movement near the bed.	1. Please watch the time. 2. Identify and isolate the environmental factors. 3. Keep a quiet surrounding near the bed while testing the monitor (like at night...)
No response when turning on the monitor	Missing batteries, misplaced batteries or broken.	Check that there are 4 'AA' 1.5V batteries correctly installed.
Warning of low battery voltage (ticking sound or red battery light flashing)	Batteries have run too low.	Replace 4 batteries.

Warranty: The Manufacturer warrants, to the original owner of this product, that the Babysense Movement Monitor to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. If this system fails to function properly, when used as directed under normal conditions, within the one-year period, the Manufacturer will either repair or replace the product, at our option, free of charge. It must be returned complete in its original package prepaid postage and insured to your distributor. This product must be accompanied by of a proof of purchase receipt indicating it is within the Warranty Period. This Warranty does not apply to a product that has been damaged as a result of improper maintenance or other misuse. This Warranty is also Void if the owner repairs or modifies the product in any way. The manufacturer is not liable for any incidental or consequential damages with regards to this product. Warranty also excludes any liability other than above. No other Warranties are given.

Returns: All returns are subject to ActiveForever.com return policy

Related Searches: respiratory movement monitor, baby monitor, baby gift

SKU

Product

Price